Health and Safety - Environment, Transport, Legal Series Training Class

Health and Safety - Environment, Transport, Legal Series Training Seminar

• Health and Safety - Environment, Transport, Legal Series: 1 Container Management (1 hours): This course provides an overview of the requirements for generators who manage hazardous wastes in containers. The general regulatory requirements are discussed, as well as the identification and definition of incompatible materials, and the individual requirements for marking, labeling, and inspecting containers. Finally the requirements for the closure of an area used to manage containers are identified.
• Health and Safety - Environment, Transport, Legal Series: 2 Contigency Plans (1 hours): This course provides an overview of the preparedness and prevention requirements for generators who manage hazardous wastes. The required emergency equipment is identified as well as the operating procedures applicable to emergencies. In addition, the Contingency Plan and the appropriate emergency procedures are discussed.
• Health and Safety - Environment, Transport, Legal Series: 3 DOT Regulatory Overview (1.5 hours): This course provides an overview of the Department of Transportation requirements for personnel managing hazardous materials. The applicable sections of the regulations and important definitions are provided. The nine steps necessary for compliance with the hazardous materials regulations are discussed, including an overview of the Hazardous Materials Table, how to properly classify a material, and how to assign a proper shipping name. In addition, the training requirements and special requirements such as security are discussed.
• Health and Safety - Environment, Transport, Legal Series: 4 EPA - Generator Subpart BB (1 hours): This course provides an overview of the Subpart BB regulations (which regulates organic emissions from specific equipment at hazardous waste management facilities) and discusses how to properly identify materials subject to the regulations. The specific requirements for different types of equipment are identified as well as the inspection and monitoring requirements for this equipment. The recordkeeping requirements for all Subpart BB regulated activities are also discussed.
• Health and Safety - Environment, Transport, Legal Series: 5 EPA - Generator Subpart CC (1 hours): This course provides an overview of the Subpart CC regulations (which regulates organic emissions from specific equipment at hazardous waste management facilities) and discusses how to properly identify materials subject to the regulations. The specific requirements for containers, tanks, and control devices are identified as well as the inspection and monitoring requirements for this equipment. The recordkeeping requirements for all Subpart CC regulated activities are also discussed.
• Health and Safety - Environment, Transport, Legal Series: 6 Field Hazard Recognition - Module 1 (0.5 hours): This course provides an overview of field hazards at industrial work locations that workers can be exposed to. This two-module course covers hazard recognition, protection from hazards and good safety practices that help avoid accidents. This first module emphasizes good housekeeping practices and protection from slips, trips and falls.
• Health and Safety - Environment, Transport, Legal Series: 7 Field Hazard Recognition - Module 2 (0.5 hours): This course provides an overview of field hazards at industrial work locations that workers can be exposed to. This two-module course covers hazard recognition, protection from hazards and good safety practices that help avoid accidents. This second module emphasizes accident prevention signs and tags, material handling hazards and work area checklists to help identify and eliminate hazards.
• Health and Safety - Environment, Transport, Legal Series: 8 Generator Inspections (1 hours): This course provides an overview of the inspection requirements for facilities that manage hazardous wastes. The general inspection program requirements are identified, as well as the specific inspection requirements for emergency equipment, tanks, and containers. The appropriate remedial actions are discussed and the recordkeeping requirements associated with inspections are identified.
• Health and Safety - Environment, Transport, Legal Series: 9 Generator Tank Management (1 hours): This course provides an overview of the requirements for generators who manage hazardous wastes in tanks. The general regulatory requirements are discussed, as well as an overview of the operating requirements for tank systems. The identification and definition of incompatible materials is reviewed, and the individual requirements for marking, monitoring, inspecting, and closure of a tank system are identified.
• Health and Safety - Environment, Transport, Legal Series:10 Harassment and Discrimination - Employees (0.75 hours): This course provides an overview of Harassment & Discrimination, classes legally protected from harassment & discrimination, Equal Employment Opportunity Commission regulations and federal statutes concerning harassment & discrimination in the workplace, and how to protect yourselves, your fellow employees and your employer from prohibited harassment & discrimination.
• Health and Safety - Environment, Transport, Legal Series:11 Harassment and Discrimination - Managers (1 hours): This course provides managers with an overview of Harassment & Discrimination, classes legally protected from harassment & discrimination, Equal Employment Opportunity Commission regulations, important court cases, and federal statutes concerning harassment & discrimination in the workplace, and how to protect themselves, their fellow employees and their employer from prohibited harassment & discrimination.
• Health and Safety - Environment, Transport, Legal Series:12 Marking and Labeling (1 hours): This course provides an overview of the Department of Transportation marking and labeling requirements for personnel managing hazardous materials. The general marking requirements are identified, as well as specific requirements for non-bulk and bulk packages. The special requirements identified for non-bulk and bulk packages are discussed, as well as the additional requirements for tanks and tank cars and identification numbers. The general labeling requirements are identified, including additional labeling requirements specified in certain situations.
• Health and Safety - Environment, Transport, Legal Series:13 Packaging (1 hours): This course provides an overview of the Department of Transportation packaging requirements for personnel managing hazardous materials. The procedures for selecting a package for a particular hazardous material are presented, as well as the general requirements applicable to all packages. The requirements applicable to non-bulk and bulk packages are discussed, and additional packaging issues such as overpacks are identified.
• Health and Safety - Environment, Transport, Legal Series:14 Placarding (1 hours): This course provides an overview of the Department of Transportation placarding requirements for personnel managing hazardous materials. The steps necessary to properly select a placard, including placarding exceptions are identified. In addition, how a placard must be designed and displayed are discussed, as well as the placarding responsibilities for both shippers and carriers.