Networking Training Classes and Seminars In Vancouver, BC

CIERS1 û Cisco Expert-Level Training for CCIE Routing and Switching v5.0

We combined two authorized Juniper courses, Juniper Enterprise Switching (JEX) and Advanced Juniper ...

TCP/IP is the globally accepted group of protocols at the core of the Internet and organizational in...

In this course, you will learn core concepts of how the Internet Protocol (IP) carries a Voice over ...

In this accelerated Boot Camp, you will gain the routing and switching knowledge needed for success ...

A strong foundation of basic networking concepts is fundamental to a successful career in informatio...

Introduction to Networking

Disaster Recovery Planning: Ensuring Business Continuity

Network Configuration and Troubleshooting

This five-day Training 2-Pack helps you prepare for Microsoft Technology Associate Exams 98-366 and 98-367, and build an understanding of these topics: Network Infrastructures, Network Hardware, Protocols and Services, Security Layers, Operating System Se...

This course is a derivative works course consisting of ICND1 and ICND2 content in its entirety, but with the content merged into a single course....

Students will learn how to install, operate, configure, and verify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, connecting to a WAN, and identifying basic security threats....

Students will learn to install, configure, operate, and troubleshoot a small enterprise network, focusing on redundant topologies, configuring EIGRP and multi-area OSPF, understanding Wide Area Network technologies, device management and Cisco licensing....

This course includes Cisco Training ExclusivesEXCLUSIVE TO GLOBAL KNOWLEDGE - Accelerate your Cisco ...

In this course, you will be introduced to networking concepts in today's increasingly connected and ...

SDN Fundamentals: The Future of Networking

Palo Alto Networks: Panorama 8.0: Manage Multiple Firewalls

SWITCH v2.0, a five-day ILT course, includes major updates and follows an updated blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added....

TSHOOT v2.0, a five-day ILT course, includes major updates and follows an updated blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added....

Palo Alto Networks: Firewall 8.0: Debug and Troubleshoot

In this advanced hands-on course, you will prepare for your JNCIP-ENT certification by experiencing ...

Managing Industrial Networks with Cisco Networking Technologies (IMINS2) 1.3

Microsoft Lync 2013 Depth Support Engineer (M55070)

This course includes Cisco Training ExclusivesEXCLUSIVE TO GLOBAL KNOWLEDGE - Accelerate your Cisco ...

In this course, you will learn how to plan and design a network for a Tellabs 1100 Optical LAN syst...

In this course, you will learn how to operate, provision, and maintain a Tellabs Optical LAN Access ...

This course provides the knowledge and skills you will require to be a successful A+ technician. It can also assist you in preparing to take the CompTIA A+ examination, exam numbers 220-902, in order to become a CompTIA A+ Certified Professional....

This course is designed for system administrators and cloud administrators who intend to implement P...

This course includes Cisco Training ExclusivesEXCLUSIVE TO GLOBAL KNOWLEDGE - Accelerate your Cisco ...

This course provides the fundamental networking skills required to deploy & support Windows Server 2016 in most organizations. It covers IP fundamentals, remote access technologies, & more advanced content including software defined networking....

Interconnecting Cisco Networking Devices, Part 2 (ICND2 v3.0)

Interconnecting Cisco Networking Devices, Part 1 (ICND1 v3.0)

This three-day course provides students with the foundational knowledge required to work with the Ju...

Module 1: Implementing IPv4 ServicesThis module explains how to plan and troubleshoot IPv4-based ne...

Palo Alto Networks:Firewall 8.0: Essentials û Configuration and Management

This course includes Cisco Training ExclusivesEXCLUSIVE TO GLOBAL KNOWLEDGE - Accelerate your Cisco ...

This five-day course, based on Junos OS Release 15.1X49-D70.3 and Junos Space Security Director 16.1...

In this course, you will learn how to configure and monitor the advanced Junos OS security features ...

This three-day Juniper Networks course is designed to cover introductory best practices, theory, and...

F5 Networks Configuring BIG-IP AFM v13: Advanced Firewall Manager

Microsoft Cloud Workshop - Enterprise Class Networking

Exam Readiness: AWS Certified Advanced Networking – Specialty

IoT and Blockchain Training

Junos MPLS Fundamentals (JMF)

Palo Alto Networks Firewall 8.1: Optimizing Firewall Threat Prevention (EDU-214)

Palo Alto Networks Traps 4.2: Deploy and Optimize (EDU-285)

R3 Corda Blockchain Training: CorDapps Development

Ansible for Network Automation (DO457)

Microservices Engineering Boot Camp

This three-day course is designed to provide students with the tools required for implementing, monitoring, and troubleshooting Layer 3 components in an enterprise network. Detailed coverage of OSPF, BGP, class of service (CoS), and multicast is strongly emphasized. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations....

This four-day course is designed to provide students with detailed coverage of OSPF, IS-IS, BGP, and routing policy. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations....

This one-day CLASSROOM course provides students with the foundational knowledge required to work with the Junos operating system and to configure Junos devices. The course provides a brief overview of the Junos device families and discusses the key architectural components of the software. Key topics include user interface options with a heavy focus on the command-line interface (CLI), configuration tasks typically associated with the initial setup of devices, interface configuration basics...

This two-day course provides students with advanced class-of-service (CoS) knowledge and configuration examples. The course begins with an overview of CoS before going into classification, policing, scheduling, and rewriting. The course then covers class-based forwarding and finishes with case studies that reenforce topics....

This two-day course provides students with intermediate routing knowledge and configuration examples. The course includes an overview of protocol independent routing features, load balancing and filter-based forwarding, OSPF, BGP, IP tunneling, and high-availability (HA) features....

This two-day course is designed to provide students with detailed coverage of multicast protocols including Internet Group Management Protocol (IGMP), Protocol Independent Multicast-Dense Mode (PIM-DM), Protocol Independent Multicast-Sparse Mode (PIM-SM), and Multicast Source Discovery Protocol (MSDP). Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations....

This five-day course is designed to cover best practices, theory, and design principles for data center design including data center architectures, data center interconnects, security considerations, Classroomization, and data center operations. This course will serve as the prerequisite course for other data center design related courses....

This two-day course is designed to provide students with the knowledge required to manage the Junos Space appliance and manage devices with Junos Space. Centralized Junos device management options offered by the Junos Space Platform (including configuration backup, synchronization, Junos image distribution, and application of templates) will be explored. Students will also learn how to use Junos Space applications, such as Security Design, Ethernet Design, and the Network Services Activatio...

The Junos Service Provider Switching course is a two-day course that provides students with intermediate switching knowledge and configuration examples that are most common in a Service provider implementation. The course includes an overview of switching concepts such as LANs, Layer 2 address learning, bridging, Classroom LANs (VLANs), provider bridging, provider backbone bridging, VLAN translation, spanning-tree protocols, and Ethernet Operation, Administration, and Maintenance (OAM)....

This three-day course is designed to provide introductory troubleshooting skills for engineers in a network operations center (NOC) environment. Key topics within this course include troubleshooting methodology, troubleshooting tools, hardware monitoring and troubleshooting, interface monitoring and troubleshooting, troubleshooting the data plane and control plane on devices running the Junos operating system, staging and acceptance methodology, troubleshooting routing protocols, monitoring...

The 4-day Juniper Networks Enterprise Switch Bundle course prepares students to install, implement and manage the EX-Series switch family of products. The courses that comprise this course discuss the configuration of Juniper Networks EX-series switches in an Enterprise network environment....

Course OverviewThis two-day course is designed to provide students with a solid foundation on Multip...

Course OverviewThis five-day course is designed to cover best practices, theory, and design principl...

Course OverviewThis two-day course is designed to provide students with MPLS-based Layer 2 virtual p...

Module 1: Planning and implementing an IPv4 network This module explains how to plan and im

Course OverviewThis three-day course is designed to provide students with MPLS-based Layer 3 virtual...

DISCLAIMERBeginning April 1, 2017, DWWTC will teach a new version of the JNCIS-ENT course. The new v...

This course uses lectures and hands-on exercises to give participants real-time experience in settin...

Course OverviewThis five-day course brings together the three-day Introduction to the Junos Operatin...

Course OverviewThis intense, two-day program is designed to prepare attendees who have previously ta...

Course OverviewThis five-day course covers the configuration, operation, and implementation of SRX S...

Course OverviewThis five-day course, which is designed to build off of the current Junos Security (J...

Course OverviewThis four-day course discusses the configuration of Pulse Connect Secure in a typical...

Course OverviewThis three-day course provides detailed coverage of the configuration of the Pulse Po...

Course OverviewThis five-day course helps prepares students prepare for the Juniper Networks Certifi...

Course OverviewThis five-day course helps students prepare for the Juniper Networks Certified Intern...

SummaryFirewall 8.0: Debug and Troubleshoot is the next-level course to Palo Alto Networks® Firewall...

SummaryThis 5-day classroom-based course provides the fundamental networking skills required to depl...

SummaryThe Palo Alto Networks Firewall 8.0 Essentials: Configuration and Management (EDU-210) course...

COMING FEBRUARY 2018!Course OverviewThe three-day Juniper Cloud Fundamentals course focuses on cloud...

Course OverviewThis five-day course is designed to serve as the ultimate preparation for the Juniper...

Course OverviewEffective October 2, 2017, the JEX course takes the place of the legacy JEX course. ...

Course OverviewEffective October 2, 2017, the AJEX course takes the place of the legacy AJEX course....

Course OverviewIn this two-day course, you will learn how to use advanced FortiGate networking and s...

Course OverviewThis 3-day class provides more in-depth work with FortiGate infrastructure and archit...

Course OverviewThe JNCIP-ENT Certification Bundle is a 5-day event that covers technology aspects th...

IJAUT - Introduction To Junos Platform Automation And DevOps

JND-SP - Juniper Networks Design – Service Provider